Contact : +33 1 41 23 50 23 (9:00 – 17:00 CEST)

SPD Specific Disconnectors (SSD) for Type 1 AC SPD

SSD1-15S-40-230
Part Number 803114
SSD1-15S-40-230

  • SPD Specific Disconnectors (SSD) for short circuit protection of Type 1 AC surge protectors

  • Surge current withstand: 12.5 kA @ 10/350µs

  • Wide range of short circuit current protected

  • Reusable after switch triggered

  • Low rated tripping current with time-current characteristics for overcurrent coordination with upstream OCPD and safety disconnect in case of SPD failure

Contact Us
The SSD range has been especially designed to associated with SPDs. These very specific devices with built-in GDT are able to conduct huge surge currents in rather small dimensions to protect Type 1 SPDs against harsh current circuit failures, furthermore, the coil in the SSD can cut off the minimum fault current. In order to comply IEC 61643-11 standards, AC power SPD must be protected against short circuit failures: these specific SPD disconnectors must be installed in the SPD branch.
Max. AC operating voltage
Uc 400 Vac
Nominal discharge current
15 x 8/20 µs impulses
 In 60 kA
Impulse current by pole
max. withstand 10/350µs by pole
 Iimp 12.5 kA
Equivalent rated AC current
 125 A
Breaking capacity
 100 000 A
Residual voltage
 Up < 1.9 kV
Format
 Monobloc modular box
Mounting
 Symmetrical rail 35 mm (EN 60715)
Operating temperature
 Tu -40/+85°C
Protection rating
 IP20
Remote signaling of disconnection
 Output on changeover contact
Dimensions
 See diagram - 1TE (EN43880)
Standards compliance
 GB/T 18802.11 / IEC 61643-11 / NB/T 42150