Type 1+2 PV surge protector - 1500 Vdc
DS50PVS-1500/12KT1
Part Number 482573
Available within 3 weeks
- Type 1+2 surge protector for Photovoltaic
- Impulse currents Iimp/Itotal : 6.25/12.5 kA (10/350µs)
- Common/Differential mode protection
- Remote signaling
- IEC 61643-31, EN 61643-31, EN 50539-11 and UL1449 ed.5 compliance
Type 1 + 2 surge protection (SPD) DS50PV/12KT1 are intended for the protection of photovoltaic power grids. The SPD cartridges are pluggable to ensure quick replacement in the event of a defect. The protection circuit consists of a fault-resistant Y-circuit with a gas discharge tube and high-power varistors. The products are available with a remote signaling system of the state of the surge protectior.
Select another reference:
SPD type
|
IEC | 1+2 |
Network
|
PV 1250 Vdc | |
Nominal PV voltage
|
Uocstc | 1250 Vdc |
Max. PV operating voltage
|
Ucpv | 1500 Vdc |
Residual Current
Leakage current to Ground
|
Ipe | < 0.3 mA |
PV Permanent Operating current
Current consumption at Ucpv
|
Icpv | < 0.1 mA |
Follow current
|
If | None |
Nominal discharge current
15 x 8/20 µs impulses
|
In | 15 kA |
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 40 kA |
Total Maximum discharge current
max. total withstand @ 8/20 µs
|
Imax Total | 60 kA |
Impulse current by pole
max. withstand 10/350µs by pole
|
Iimp | 6.25 kA |
Total lightning current
max. total withstand @ 10/350µs
|
Itotal | 12.5 kA |
Current withstand short circuit PV
|
Iscpv | 15 000 A |
Connection mode(s)
|
+/-/PE | |
Protection mode(s)
|
Common/Differential mode | |
Protection level +/PE (-/PE)
@ In (8/20µs)
|
Up | 5.3 kV |
Technology
|
MOV | |
Connection to Network
|
By screw terminals: 2.5-25mm² | |
Format
|
Plug-in modular box | |
Plugable
|
Yes | |
Mounting
|
Symmetrical rail 35 mm (EN 60715) | |
Housing material
|
Thermoplastic UL94 V-0 | |
Operating temperature
|
Tu | -40/+85°C |
Protection rating
|
IP20 | |
Outdoor application
|
No | |
Disconnection indicator
|
3 mechanical indicators | |
Spare module(s)
|
DSM50PV-1500/12KT1 | |
Remote signaling of disconnection
|
Output on changeover contact | |
Dimensions
|
See diagram | |
Weight
|
0.477 kg |
Standards compliance
|
IEC 61643-31 / EN 61643-31 / EN 50539-11 / UL1449 ed.5 | |
Certification
|
TUV |
Thermal disconnector
|
Internal | |
Back-up protection device
|
Without |