Coaxial surge protector for video transmission networks
CNP06 B/FM
Part Number 64270
- Coaxial surge protector
- Multiples connectors
- Low insertion loss
- Easy installation
CNP surge protectors are designed to protect sensitive equipment, connected to coaxial lines as computer networks, video-transmission, against transient surge voltages and disturbances created by lightning.
Select another reference:
Network
|
coaxial DC-100 MHz | |
Nominal line voltage
|
Un | 5 V |
Max. DC operating voltage
|
Uc | 10 Vdc |
Max. frequency
|
f max. | DC-100 MHz |
Insertion loss
|
≤ 0.5 dB | |
Return loss
|
≥20 dB | |
Impedance
|
50/75 ohms | |
VSWR
|
< 1.3:1 | |
Max. load current @25°C
|
IL | 0.5 A |
Operating current
Continious current at Uc
|
Ic | None |
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 20 kA |
Protection mode(s)
|
Common mode | |
Protection level
@ In (8/20 µs)
|
Up L/L | 20 V |
Protection level L/N
@ In (8/20µs)
|
Up L/N | 20 V |
Protection level L/PE
@ In (8/20µs)
|
Up L/PE | 20 V |
Impulse current
2 x 10/350µs Test - D1 Category
|
Iimp | 2.5 kA |
Nominal discharge current
C2 Category
|
In | 5 kA |
Max Power
|
4 W | |
DC Pass
|
No |
Technology
|
GDT+TVS diode | |
Connection to Network
|
Connector BNC Female/Male | |
Format
|
Insulating box | |
Mounting
|
On plate | |
Housing material
|
Metal+plastic | |
Operating temperature
|
Tu | -40/+85°C |
Protection rating
|
IP20 | |
Outdoor application
|
No | |
Failsafe mode
|
Short-circuit - transmision cut-off - fault mode 2 | |
Disconnection indicator
|
Transmission interrupt | |
Dimensions
|
See diagram | |
Weight
|
0.054 kg |
Standards compliance
|
IEC 61643-21 / EN 61643-21 / UL497E |